Main technical parameter:
◆ Volume (length× width ×height):•370 × 340 × 1570mm ◆ UF flow scope: 0～1800ml/h(±30ml/h )
◆ Weight: about 90kg 0～4000ml/h(optional)
◆ Power supply voltage: •AC220V±10% ◆ ISO UF flow scope:0～2000ml/h(±30ml/h)
•Frequency:50HZ ~ 60 HZ ◆ TMP: •Scope:-100mmHg～+600mmHg
•Power: 1500W (±20mmHg)
◆ Blood pump/spare pump:•Flux:15 ~ 340ml/min (Ф 6mm) ◆ Blood leakage monitor:
20 ~ 460ml/min (Ф 8mm) •over 1ml blood per liter dialysate
◆ Double-hose pump: flow: 20ml/min~150ml/min (flow:500ml/min)
Electric balance:weight ◆ Blood level monitor: ultrasonic sensor
scope:0~9kg(±0.5%) ◆ Air bubble monitor:
◆ Heparin pump:•Flux: 0.1ml/h～10ml/h(±5%) •Infrared and response threshold value:
•Precise: 0.1ml/h Single air bubble of 200 и I exists when
•Injector size: 20ml/30ml/50ml Blood flux is 200ml/min
10ml/20ml/30ml(selectable) ◆ Inflow pressure:0MPa～0.6MPa
◆ Arterial pressure:•display scope:-300～+400mmHg ◆ Inflow temperature: 5℃～30℃
(±10mmHg) ◆ Environment temperature: 10℃～30℃
◆ Venous pressure:•display scope:-50～+300mmHg • Relative humidity≤70%
(±10mmHg) ◆ Rinse/disinfection: chemical disinfection
◆ Dialysate flow:•300ml/min～800ml/min linearity (citric acid,peracetic acid and oxalic acid)
adjustable (+10%) ◆ Hot rinse: 80℃
(-5%) ◆ Back-up power supply: last for 15-30min
•Temperature:35.0℃~39.0℃ after electric-cut.(optional)
•Resolving rate:0.1℃
•Conductivity:12.5mS/cm~15.5mS/cm
(±0.1 mS/cm)
TMS-4048 function
Be applicable of hemodialysis treatment,hemoperfusion,Plasma Exchange,Pure ultration,Hemofiltration,
Hemodiafiltration,CRRT project.Compared with TMS-3038,touch screen was equipped and it can show
Na+ and UF profiles;In addition,the functions ie.backup power supply,Kt/V,HCO3¯ adjustment,single
needle and acetate treatment are optional.